Pureco Mineral Paint

PURECO Silk Mineral Paint is the perfect option for people who like to paint and go. These paints are easy to use and require minimal prep on your projects. It is also formulated so that it is self-sealing, therefore eliminating the need to use sealer, wax, topcoats, etc. Made from premium ingredients, this paint is 100% washable, easy to clean and is also stain resistant.

PURECO Silk Mineral Paint is an Australian made paint that dries to a modern sleek matte to low sheen finish. It is absolutely perfect for furniture and home décor projects. This is also the wonderful choice for people who like to paint and go and is more suited to smooth clean finish rather than textured looks. It can be applied using brush, roller, or spray. However, for best results, you can use a synthetic smooth flat brush, and be sure to do nice, even smooth strokes.

PURECO Silk Finish is an eco-friendly paint. It is easy to clean with warm water. And also, quick drying. Typically, it dries in about 30 minutes depending on the humidity. It takes about a week or two to fully cure. However, it is best to recoat after 2 to 4 hours.

With PURECO Silk Finish, a little goes a long way. A 200ML paint will cover about 2-3 square meters of surface area, while a 600ML paint will cover approximately 7-8 square meters depending on the color choice. For example, using whites will require more coatings, thus making the paint cover less surface area.

How to Use PURECO Mineral Paint:

  • Do a test patch to determine if this product is what you need for your project.
  • Clean surface prior to painting with hot soapy water.
  • Scuff sand surface with 80grit sandpaper to give it tooth and promote adhesion. To increase adhesion, you may also apply PURECO Base & Blocker. However, not all pieces will require Base & Blocker, so assess if you really need it on your piece. Apply a coat of Base & Blocker over dark surfaces to paint with Whites & Brights to reduce the number of coats of Silk Mineral Paint.
  • Stir the paint thoroughly and ensure that your application tool i.e., brush, roller, or sprayer is clean. For best result, use synthetic, smooth flat paint brush, and apply paint in nice even smooth strokes.
  • Apply 2-4 coats, with sanding in between coating to help smooth brush strokes.
  • Since PURECO Silk Finish has a built-in sealer, you don’t need to further seal, unless desired.

Check out more PURECO Products in Australia here at Capriole Creative.

54 Products Found