Fusion Matte Tough Coat 500ml
Fusion Wipe-On Poly 500ml
or 4 payments of $9.24 with InfoIn Stock
Fusion Matte Tough Coat 500ml - Wipe-On Poly Clear Top Coat
Fusion Matte Tough Coat is a clear wipe-on poly clear top coat that is best for kitchen cabinets, tabletops, kitchen cupboards and other pieces that will be placed in high traffic areas. This matte topcoat is able to add durability to any piece against the daily wear and tear, as well as water damage and food stains. This clear wipe-on poly top coat is water based and non-yellowing. It dries to either a beautiful matte finish or satin gloss finish.
Fusion Matte Tough Coat is a water-based product that dries quickly and dries to a much harder finish than wax. Nevertheless, it is extremely easy to apply. This product is ideal to use on lighter colours since it tends to show streaks when used on medium to darker colours. The streaks are water vapors trapped within the tough coat and tend to be visible on dark colours. A little of this goes a long way – a 500ml bottle will typically cover approximately 75 sq ft surface. It also cleans up quickly with soap and warm water.
How to Apply:
- Start with rolling to mix the product thoroughly. You can also give it a gently stir. Or use a paint stick or popsicle stick to stir it gently. Do not shake the container as it will product bubbles.
- Soak a dense sponge, automotive sponge, or an applicator pad onto the Matte Tough Coat topcoat finish. Make sure not pour too much of the product on to the sponge or applicator pad.
- Then apply it from one side to the other side of the surface of your project to avoid brush strokes or streakiness.
- Do not continue going back over the surface because as it starts drying the Matte Tough Coat will start grabbing texture.
- Let it dry for about 2-4 hours before applying the second coat. If you require additional coating, remember that additional coating should always be at least 2-4 hours apart. Also, take note that it will take longer to completely dry in humid areas.
NOTE: If you are using Fusion Matte Tough Coat 500ml wipe-on poly clear top coat on a newly painted surface, be sure to wait at least 12-24 hours before applying the product.
|Brand||Fusion Mineral Paint|
Other People Purchased:
More From Fusion & Homestead House Extra Finishes, Waxes & Oils: