PURECO Gloss Sealer 200ML

PURECO Gloss Sealer 200ml has the highest sheen level among the PURECO sealers. Like the other sealer, it is a non-yellowing and is formulated to be used on PURECO Paints including acrylic, chalk, and mineral paints. It can also be used on other art mediums such as decoupage medium and sealing transfers. This sealer is also ideal for a broad range of furniture and home décor projects as it can be used for interior and exterior pieces.

PURECO Glitter Sealer 200ML is an Australian Made product. This sealing solution is easy to use and self-leveling. It is formulated so that it is able to repel staining and can be used on so many applications. It is also quick drying and will completely dry in about 40 minutes at 25 °C. However, the recommended recoat time is 3 hours at 25 °C. When it comes to this product, a little goes a long way. A Litre will cover approximately 13 square meters but will depend on surface roughness and application technique.

PURECO Glitter Sealer 200ML can be applied using a lint-free cloth or an applicator sponge. Commonly, a maximum of 2 coats is required. It is also easy to clean with water. Like most PURECO Products, this sealer is water-based and eco-friendly. It has zero to low VOC’s (volatile organic compounds), as well as Cruelty-Free, Non-Toxic, and Solvent Free. But while it is relatively safe, it is still highly recommended to keep away from children and pets. In addition, be sure to use it in a well-ventilated area.

How to Use:

• Ensure that the area is well-ventilated and is not directly hit by sunlight.
• Make sure that your surface is clean, free from dust and that it’s completely dry.
• Stir or shake the product well before using. Be sure to decant a small amount of the sealer to keep from contaminating your container.
• Do a small test prior, so as to ensure that your desired finish is compatible with the paint or stain.
• Using a broad brush, sprayer, lint-free damp cloth or a sponge, apply a single coat of the Sealer.
• Leave it to dry completely before applying a second coat. Remember not to apply more than 2 coats.

This Sealer is available in two sizes: PURECO Gloss Sealer 600ML and 200ML.

For other Australian Made Paints & Products or if PURECO Base Blockers & Finishing Products, be sure to browse through our website.

Check out PURECO User Guide.