PURECO Eggshell Semi Gloss Sealer 200ML
PURECO Eggshell Semi Gloss Sealer 200ML is a solution that's specially made to be used on PURECO Products such as sealing transfers and decoupage mediums. This is ideally suited to be used over paints such as acrylic, chalk, and mineral paints, as well as over stains, and even raw timber. It is non-yellowing and dries to a satin sheen, invisible finish. This sealer is also ideal for a broad range of furniture and home décor projects as it can be used for interior and exterior pieces. Furthermore, it can even be used for gluing down and sealing wallpapers.
PURECO Eggshell Semi-Gloss Sealer is an Australian Made product. This sealing solution is easy to use and self-leveling. It is formulated so that it is able to repel staining and can be used on so many applications. It is also quick drying and will completely dry in about 30 minutes at 25 °C. However, the recommended recoat time is 4 hours at 25 °C. When it comes to this product, a little goes a long way. A Litre will cover approximately 13 square meters, but will depend on surface roughness and application technique.
PURECO Eggshell Semi-Gloss Sealer 200ML can be applied using a lint-free cloth or an applicator sponge. Commonly, a maximum of 2 coats is required. It is also easy to clean with water. Just like most PURECO Products, this is water-based and eco-friendly. It has zero to low VOC’s (volatile organic compounds), as well as Cruelty-Free, Non-Toxic, and Solvent Free. But while it is relatively safe, it is still highly recommended to keep away from children and pets. In addition, be sure to use it in a well-ventilated area.
How to Use:
- Ensure that the area is well-ventilated and is not directly hit by sunlight.
- Make sure that your surface is clean, free from dust and that it’s completely dry.
- Stir or shake the product well before using.
- Be sure to decant a small amount of the sealer to keep from contaminating your container.
- Test a small amount of the sealer prior, so as to ensure that your desired finish is compatible with the paint or stain.
- Using a broad brush, sprayer, lint-free damp cloth or a sponge, apply a single coat of the Sealer.
- Leave it to dry completely before applying a second coat. Remember not to apply more than 2 coats.
This Sealer is available in two sizes: PURECO Eggshell Semi Gloss Sealer 600ML and 200ML.
Check out PURECO User Guide.
Other People Purchased:
More From Pureco Base Blockers & Finishing Products: