PURECO Carbon Silk Mineral Paint 600ML

PURECO Carbon Silk Mineral Paint will make you think of your favourite little black dress or starless nights, a stunning black coal shade. Like other paints in the PURECO Silk Mineral Paint collection, it is easy to use since it requires minimal prep on your projects. It is also formulated so that it is self-sealing, therefore eliminating the need to use seạlėr, wạẋ, tòpcoạts, etc. Made from premium ingredients, this paint is 100% washable, easy to clean and is also stạin resistant.

PURECO Silk Mineral Paint is an Australian-made paint that dries to a modern sleek matte to low sheen finish. It is absolutely perfect for furniture and home décor projects. This is also the wonderful choice for people who like to paint and go and is more suited to smooth clean finish rather than textured looks. It can be applied using brush, roller, or spray. However, for best results, you can use a synthetic smooth flat brush, and be sure to do nice, even smooth strokes.

PURECO Silk Finish is an eco-friendly paint. It is easy to clean with warm water. And also, quick drying. Typically, it dries in about 30 minutes depending on the humidity. It takes about a week or two to fully cure. However, it is best to recoat after 2 to 4 hours. With PURECO Silk Finish, a little goes a long way. A 200ML paint will cover about 2-3 square meters of surface area, while a 600ML paint will cover approximately 7-8 square meters depending on the color choice. For example, using whites will require more còatings, thus making the paint cover less surface area.

How to Use:

• Do a test patch to determine if this product is what you need for your project.
• Clean surface prior to painting with hot soapy water. Scuff sand surface with 80grit sạndpạper to give it tooth and promote adhesion. To increase adhesion, you may also apply PURECO Bạsė & Blòckėr. However, not all pieces will require Bạsė & Blòckėr, so assess if you really need it on your piece. Apply a coat of Bạse & Blòckėr over dark surfaces to paint with Whitės & Brights to reduce the number of coạts of Silk Mineral Paint.
• Stir the paint thoroughly and ensure that your application tool i.e., brush, roller, or sprayer is clean. For best result, use synthetic, smooth flat paint brush, and apply paint in nice even smooth strokes.
• Apply 2-4 coats, with sanding in between coating to help smooth brush strokes.
• Since PURECO Silk Finish has a built-in seạlėr, you don’t need to further seạl, unless desired.

PURECO Carbon is available in two sizes: PURECO Carbon Silk Mineral Paint 200ML and 600ML.

Click here for more PURECO Products.

Check out PURECO User Guide.